top of page
9-30437 ZP3 Interface Card For LaserSense
Price
R0,00
| Description The 9-30437 is an interface which can be attached directly onto the main control board of any LaserSense aspirating detector. The 9-30437 card plugs into the main control board inside the detector enclosure. The board enables the detector to be directly addressed and communicate with the ZP3 main control panel. Plug In Terminals Detectors are wired onto the loop using plug in terminals located on the LaserSense detector main control board. The detector and interface are easily addressed by switch settings prominently positioned on the card. Advanced Alarm Indication The interface is recognized by the main control panel as device type HSSD and dependent upon the analogue signals received and control panel software installed, will provide the following alarm conditions – Fault, Alert, Pre-alarm, Fire. (Alert not displayed on ZP3 panel) Up to 127 sensing devices can be connected to each of the control panel loops. |
bottom of page